ep

June 19, 2020

Helical-worm gearmotors
Due to their design and from being coupled with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized regarding efficiency
Do you anticipate a drive answer to impress you with its high level of performance and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These can be implemented separately in the modular program. In this manner, they offer you an enormous range of sizes, gear ratios and engine sizes.
However, their greatest strength is usually their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear systems. This is how you save extra energy in the operation of your systems and so are able to noticeably reduce ongoing working costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with an array of AC motors. Furthermore, you can freely configure all the relevant properties. In this manner, you can effectively utilize all the benefits provided by this combination of low-noise helical-worm gear unit and performance-optimized engine. Even greater variance can be achieved because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save money and time
By opting for among our gearmotors, you already are saving money and time with this selection and task planning. This is because our modular system allows a multitude of mixture options for gear devices and motors. You can for that reason reduce operating costs, depend on an extended service life and reap the benefits of simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than solitary helical-worm gear units
Very low-noise operation
helical worm gear motor available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm equipment unit with our AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm wheel provide exceptional toughness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Because of their outstanding efficiency, these drives can be used in every industrial sector and tailored to person torque and swiftness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique combination of optimized worm wheel materials with special lubricants, optimized shape, this powerful engine achieves high levels of performance and torque. The casing machined on all sides allows diverse mounting options. Dual chamber shaft seals are used as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and higher torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, mounting pilots and flanges offer a wide selection of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Keeps contaminants and water out.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new criteria for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration right now and a future proof alternative. The EP gear motor offers total versatility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in option positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
EP gear motors adhere to UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total answer for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series can be dirt tight and hose proof,and can be utilized outside or in wet and dusty conditions without the usage of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique combination of optimized worm wheel materials with particular lubricants and optimized shape, this powerful geared engine achieves high degrees of efficiency and torque. The reduced contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with extended life performance features and simplified maintenance. The utilization of condition of the artwork helical and worm equipment combinations affords optimum functionality fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your particular mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All devices adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared motor. A favorably priced option for the standard tasks expected of a right-angle drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the motor shaft. This integrated small design is an essential aspect for the high precision and the remarkable stiffness of EP geared motors.
For vector-controlled inverter operation utilization of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy steel and the flanks are precision ground. The worm wheels are made from unique wear-resistant bronze. Helical worm gears include a helical gear. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal style. The housings are manufactured from high quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG