November 7, 2019

Single and dual hydraulic planetary drive reduction planetary equipment drives to be utilized with electric, hydraulic, air motors or mechanical power insight from high quickness, low torque sources to provide reduced speeds at increased torques. The input aspect has standard SAE pads for engine mounting. Obtainable in the three output configurations proven below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input speed is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output part has hub for installation automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring gear to reduce backlash growth due to wear. The exterior bearing nut provides the greatest in shaft retention and shaft power. Output can be a spindle shaft or different sizes of integral pinion gears.