Materials Managing Energy UNIT 2
Standard Description
This power unit characteristics electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing velocity managed by the strain compensated flow management valve. Goods of this series could be widely utilized in the sector of logistic products like fork lift, mini lift table, and so on.
Specific Notes
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned just before mounting the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which should also be clean and free of impurities, N46 hydraulic oil is recommended .
4. Oil transforming is needed just after the preliminary a hundred operation hrs,afterwards the moment every 3000 hours.
five. The energy unit really should be mounted horizontally.

Materials Handling Electrical power UNIT one
Common Description
This electrical power unit is designed for your fork lift market, consisting of really efficient gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down motion are managed by the lever with the manual release valve, and that is outfitted with an electric switch to activate the motor. The lowing velocity is controlled through the stress compensated flow handle valve.
Special Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned ahead of installation of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
four. Oil shifting is needed soon after the initial one hundred operation hours, afterwards as soon as each and every 3000 hrs.
5. The power unit proven is designed to be mounted horizontally.