ep

January 19, 2021

Common Description
This energy unit options a long term magnet motor that has a energy up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve with the lowering velocity managed through the stress compensated movement management valve. Products of this series may be widely used in the sector of logistic products this kind of as fork lift, mini lift table, and so on.
Special Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned before installation of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which really should also be clean and absolutely free of impurities. N46 hydraulic oil is suggested.
four. This power unit is built to be mounted vertically.
5. Check the oil degree in the tank following the first star in the energy unit.
six. Oil altering is needed soon after the first a hundred operation hours,afterwards as soon as every single 3000 hrs.
seven. More pump sizes and tank sizes are avaiable upon request.