ep

December 3, 2020

This standard range of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo electric motor technology, providing restricted integration of the electric motor to the unit. Angular backlash of less than 1 arc-moments is provided standard.

They are available in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of engine couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.

Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and digital line shafting. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and decrease the expenditure for valuable set up space.

The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors give you superb attenuation properties for the procedure of your systems with low degrees of vibration. This is certainly because of the longitudinal program of force on the input shaft. This allows torque impulses to become prevented efficiently and for maximum results in terms of running smoothness and noise reduction to be achieved.

Both the equipment unit, and the synchronous servomotor are based on our modular system. This enables you to have completely individual configuration possibilities for every application. One point is for certain – Our servo gearmotors are genuine specialists for very particular requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a gear in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are metal or stainless steel.

While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A main benefit of worm gear reducers is that they produce an output that is 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to change the direction of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability may be limited to the point where it needs gearing. As servo manufacturers develop more powerful motors that can muscle tissue applications through more difficult moves and create higher torques and speeds, these motors require gearheads equal to the task.

brass worm gear