One reduction worm gearing provides high ratio reduction with few shifting parts in a close-coupled small drive. The right angle arrangement of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient electric motor speeds are decreased to slower speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and lengthy service lifestyle. The hardened surface and polished alloy metal worm develops a smooth, work hardened surface area on the bronze gear. For this reason worm gears use in and improve with extented service while other gears are deteriorating. Ever-Power offers a broad collection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves serious shock loads or feasible housing damage from external sources (as in steel mills or mobile equipment applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the transmitting of higher horsepower levels than are feasible with standard cast iron products. Extra heavy aspect plates connect the worm and equipment shaft bearing facilitates, assuring correct meshing of the gear under all load conditions. In smaller sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can offer custom quickness and reversed engineered reducers for the application, be it a new project or a direct drop-in replacement for a competitor’s quickness reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also incorporates a hardened, ground and polished alloy steel worm. This combination develops a simple, work-hardened mating surface area of the bronze equipment which enhances with prolonged service.
Worm gearing is a course of equipment reducers that utilizes correct angle, nonintersecting shafts. This style of reducer provides smooth and quiet procedure and allows for the likelihood of large acceleration reductions. These gears are available from stock in a wide selection of ratios, from as low as 4:1 to as much as 3600:1. The small design and construction allows worm gear reducers to be placed in a relatively small space. Thus, high reductions in a restricted package size can be achieved with this configuration. Our worm equipment features the constant sliding tooth action between worm and one’s teeth. This increases the tolerance for large loads and shock loads. Worm gear drives provide users high reducing capacity for relatively low cost when compared to some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series bottom on years of experiences uses designed teeth surface area with unsurpassed torque transfer efficiency with great efficiency, efficency and price.Worm gear program transmits power through sliding contact, leading to extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear package which consists of a worm pinion input, an output worm gear, and includes a right angle output orientation. This kind of reduction gear container is normally used to take a rated motor velocity and produce a low speed output with higher torque worth based on the decrease ratio. They often times can resolve space-saving problems because the worm gear reducer is among the sleekest reduction gearboxes available due to the little diameter of its result gear.
worm gear reducerWorm gear reducers are also a popular type of speed reducer because they provide the greatest speed reduction in the tiniest package. With a higher ratio of speed reduction and high torque output multiplier, it’s unsurprising that many power transmission systems make use of a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical screening equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm equipment reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with durable compression-molded glass-fill up polyester housings for a durable, long lasting, light weight speed reducer that’s also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a solid or hollow result shaft and show an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other reduction gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also known as worm gearbox or worm rate reducers. Worm gear reducers are used for speed reduction and raising the torque for electrical electric motor drives. You can decide to mount your NEMA motor to the reducer by using the NEMA C encounter worm gear speed reducer flange or make use of a coupling. If you want a coupling for the result or input shaft discover our coupling section for choosing the coupling. You can expect four assemblies left hands and right hand and double result shaft and shaft input and shaft output. Interchangeable with many worm gear manufactures. Find data sheet in product overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear swiftness reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are perfect for water/waste-water devices drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or components handling systems where large torques/sluggish speeds are needed.
These reducers are also available with a helical principal reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange attach with either right, left or dual result shafts or a hollow bore output. The indirect drive models are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They provide an effective low priced solution to speed decrease and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the mandatory torque and assistance factor for the application. Click on “Specs” above for a table that will aid in determining the service aspect. For service factors above 1.0, multiply the mandatory torque by the service factor.
Our regular 700 Series – the heart of Ever-Power swiftness reducer products – has been serving industry reliably for over 40 years. Its tested modular style has set the market standard for performance and is the most imitated product in today’s worm gear acceleration reducer marketplace. But why accept a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is constructed of close-grained cast iron and for rigid gear and bearing support. It also offers excellent high temperature dissipation.Double lip, spring-loaded seals guard against oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Essential oil sight gauge for simple maintenance (not available upon sizes 25 and 34).Factory oil loaded.Every unit test run just before shipment.Universal mounting with bolt-on foot.Highly modifiable design.All of this at substantially reduce prices than you have been accustomed to paying for reducers of lesser quality. Less