DK Detachable Teeth Sprockets

Any damage about the teeth surfaces of a sprocket diminishes the life in the conveyor chain.
With standard sprockets, considerably worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers to the dramatic savings in price and time.
Structure
The teeth could be replaced by two methods: person tooth replacement or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on for the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the proper.
The over photograph plus the leading right illustration present a sprocket for personal tooth replacement. Since the joint encounter concerning the replaced teeth plus the sprocket is formed inside a distinctive arc, the bonding accuracy is higher and also the sprocket strength is enhanced. Furthermore, since the load acting around the mounting bolts is decreased, there exists less possibility of loosening. This sprocket building is patented.
You will find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for massive sprockets receiving hefty loads and welded sheet steel hubs for other applications.