Energy UNITS FOR DOUBLE-SCISSORS LIFT

General Description
Outfitted with the zero leak bidirectional checking sole-noid valves, this power unit is developed for the operation of two independent circuits. Which are respectively for the main and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in situation of power loss. If a lot more independent circuits are needed for your application please get in touch with us for availability.
Remark: one. Please seek the advice of our sales engineer for that distinctive pump displacement, motor energy or tank capability.
two. CSA or UL certified motors can be found upon request.
Distinctive Notes
1. The AC motor is of S3 duty cycle, which may only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all the hydraulic elements concerned prior to set up of the energy unit.
three. Viscosity with the oil shoud be 15~46 cst,plus the oil should really be clean and totally free of impurities,N46 hydraulic oil is suggested.
four. The electrical power unit should really be mounted vertically.
5. Check the oil degree while in the tank just after the preliminary operating of your power unit.
six. Oil modifying is required right after the preliminary one hundred operation hours,afterwards once each 3000 hrs.