planetary track drive

Features
efficiency and compact design
high pressure technology escalates the efficiency of the hydraulic system
single or Dual speed motors with included counterbalance valve and comfort valves
hydraulic brake directly applied on the motor
automatic speed change obtainable upon request
wet disk brake patented technology
lower functioning temperature, higher system efficiency
working temperature range – 40°C / + 110°C
Reliability and Durability
low displacement, high pressure motors for longer existence of Planetary Track Drive critical parts and increased toughness of the entire system
complete Bronze cylinder sleeves on rotating block
bimetallic (Bronze/Steel) distribution plate
rotary group with differential springtime system which increases electric motor life
gearbox primary seal with triple seal system: mechanical labyrinth, v-band seal, main oil seal
main seal very easily replaceable without gearbox disassembly
gearbox main bearing manufactured from a single part, easily replaceable, completely supplied with pre-set load

Besides excavators, the PMCI drives with higher decrease ratios can be used on a number of applications: travel drives for mobile crawler cranes, crushers, platform boom-lifts, soil compactors, pavers, etc. Because of the small and effective style that integrates engine and planetary gearbox on the PMCI versions, the utilization of expensive fully adjustable motors can often be avoided.

Input power (max) 71 kW (95 hp)
Input speed (max) 2800 rpm2
Output torque (intermittent) 33,895 Nm (25,000 lb-ft)
Output torque (continuous) 18,710 Nm (13,800 lb-ft)
1 Actual ratio would depend on the drive configuration.
2 Max input speed related to ratio and max result speed
3 Max radial load positioned at optimum load position
4 Weight varies with configuration and ratio selected
5 Requires tapered roller planet bearings (unavailable with all ratios)
General data
Approximate dry weight 215 – 263 kg (475 – 580 lb)4
Radial load (max) 28,570 kg (63,000 lb)3
Drive type Speed reducer
Hydraulic electric motor input SAE C or D

Product features include:
Single or two-stage reduction model, with transmissible torques up to 16.0 kNm..
Integrated parking brake.
Broad range of gear reduction ratios.
Manual release system for vehicle quick towing.
Integrated orbital or axial piston motors produced by EP.
Preset for semi-integrated industrial engines.
Various mounting dimensions.