China Professional Gearbox Power Take off Spline Type for Crane Special Vehicle China Truck Shaft Pto Assembly with Best Sales

Product Description

 PTO (Power Take Off ) Gear Spline Type For Crane Special Vehicle  China Truck Shaft  PTO CZPT 12,13,14,15,16,17,20,24,27,28,50,51,52,211, 212,521 Assembly

Power take-off SDQ27-21 No.: SDQ27-21
(Car power take-off) Main technical parameters: Current model: SDQ27/21PQ1, Manipulation mode: Pneumatic, Output shaft rotation: Contrary to engine rotation, total power take-off ratio: 1.845, Applicable models: EQ1208G, output torque (Nm): 350, equipped with gearbox: DC85JTZ 17G0Z56-571 17GOA3-(33.35.36) 17G571-N9-N9-N9-680, gearbox first gear ratio: 7.640

Car power take-off No.: SDQ12-83
(car power take-off)

Car power take-off No.: SDQ12-72
(car power take-off) power take-off total speed ratio: 1.199, output torque (N.m): 250, output shaft rotation: opposite to the engine rotation, operating mode: pneumatic, power take-off and gearbox meshing gear: helical gear

Car power take-off No.: SDQ12-68
(Car power take-off) main technical parameters: the current model SDQ12/68PQ1-A, control mode: pneumatic, output shaft rotation: contrary to the engine rotation, the total speed ratio of the power take-off: 1.19, applicable models: CA1092, output Torque (Nm): 350, equipped with gearbox: CA6T123, TS6-53 (direct gear), CATS6-62, gearbox first gear ratio: 6.515.

Power take-off SDQ212-70-1 No.: SDQ212-70-1
(Car power take-off) main technical parameters: current model: SDQ212/70PQ1-1, control mode: pneumatic, output shaft rotation: opposite to the engine rotation, the total speed ratio of the power take-off: 0.88, Applicable models: Fuller , Fast, output torque (Nm): 650, equipped with gearbox: 12JS160TA

Power take-off SDQ521 No.: SDQ521
(Auto power take-off) Main technical parameters: current model: SDQ521, control mode: pneumatic, output shaft rotation: opposite to the engine rotation, total speed ratio of power take-off: 0.782, Applicable models: Fuller, Fast , Output torque (Nm): 420, equipped with gearbox: RT-11609A, 11509C RTO-11609B, 11509F 8JS, 9JS

Power take-off SDQ212-70 No.: SDQ212-70
(Car power take-off) main technical parameters: current model: SDQ212/70PQ1, control mode: pneumatic, output shaft rotation: the same as the engine rotation, the total speed ratio of the power take-off: 0.83, applicable models: Xihu (West Lake) Dis.n, S Taier, Fast, output torque (Nm): 4   FAW TZ17-449 CA6T-138(FAW Eaton) 6-74 SDQ15/75 1.-Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B   SDQ23/30 1.15 250 Helical 24 Furika LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 525 SDQ23/32 1.24 170 Helical 31 FOTON Furika SDQ33/32 Helical 34 SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 1061 SDQ23/37 1.238 2-LD4-90651 17KW1-N9-N9-Q17421 2830.5   SDQ42/27 1.15 200 30 IV .ECO NAVECO LC6T35   SDQ50/35 1 300 Straight 22 Helical 26 JAC LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) 646 SDQ50/45 1.1 280 Straight 14 FOTON AUMARK WLY6S46 646 SDQ50/69 1.187 350 Helical 28 LC6T540 15CO7571   SDQ50/63 1.13 350 Helical 29 JAC LC5T97 LC5T30( 6teeth) 5T97 SDQ50/71 1.17 250 Helical 31 LC5T400M1(A2Q08) 5T35 SDQ50/74 1 200 Helical 31 FOTON Oling NISSAN Z.F5S400V   SDQ51/44 1.5 200 Straight 32 Helical 42 NISSAN MSB-5M(A2Q05) LC5T88(6 teeth) ISU .ZU QINGLING SDQ51/62 1.22 250 Helical 37 ISU .ZU QINGLING MSB-5M(A2Q05) LC5T88(6 teeth) ISU .ZU QINGLING SDQ51/63 1.03 250 Helical 38 ISU .ZU QINGLING DN3-70030-E0 6MT1420 DN3 SDQ51/65 1.26 350 Helical 32 ISU .ZU QINGLING MSB-5S/5M/5SM 5MT1280JD JC526T3D 1571 5T88 SDQ51/74 1.633 250 Helical 35 JMC small FOTON WLY5TS32C-58-32 Xihu (West Lake) Dis.feng WLY5TS32-31-32       Xihu (West Lake) Dis.feng FOTON JC528T8 1571 5T88 SDQ51/67 1.2 200 Helical 41 JMC ISU .ZU MRB6P( EURO3)   SDQ52/74 1.16 350 25 ISU .ZU QINGLING MRB6Q MLD6Q 5T ISU .ZU SDQ52/77 1.18 400 Helical 30 ISU .ZU QINGLING 8JS85E 17JK-G18569(JiangKai) 85E QD40A 1.01 350 Straight 18 Helical 19 FAST, Xihu (West Lake) Dis.feng RT-11609A RT-11509C   SDQ211/70-A Q.8 700 Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IV .ECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN 17G0A9-22 9JS135T-B   SDQ211/70-1 1 400 9JS119T-B(170571-K14E3)   SDQ211/70-3 0.86 400 9JS119TA   SDQ211/70-4 1 500 RTO-11609B RT-11509F   SDQ211/70-5 0.94 650 12JS160TA   SDQ212/70-1 0.88 650 Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IV .ECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN 12JD160TA 12JD180T   SDQ212/70-2 A5J38T   QC20A 1.61     FOTON

HWP type Power Take-Off

 

No PTO Model Ratio Torque Transmission Output Mode Control Position
1 HWP-X23/55CHQ 1.1206 300N.M LC6T450M1 Spline Pneumatic Side
2 HWP-X23/55TQ 1.1206 300N.M LC6T450M1 Flange Pneumatic Side
3 HWP-X30/71CHQ 1.5517 250N.M LC5T30 Spline Pneumatic Side
4 HWP-X30/71TQ 1.5517 260N.M LC5T30 Flange Pneumatic Side
5 HWP-X31/63CHQ 1.1099 300N.M LC6T540 Spline Pneumatic Side
6 HWP-X31/63TQ 1.1099 300N.M LC6T540 Flange Pneumatic Side
7 HWP-X31/74CHQ 1.5621 250N.M LC5T40 Spline Pneumatic Side
8 HWP-X31/74TQ 1.5621 250N.M LC5T40 Flange Pneumatic Side
9 HWP-I35/62CHS 1.2971 200N.M MSB-5M Spline Manual Side
10 HWP-I35/62TS 1.2971 200N.M MSB-5M Flange Manual Side
11 HWP-X35/65CHQ 1.6433 250N.M ML642A Spline Pneumatic Side
12 HWP-X35/65TQ 1.6433 250N.M ML642A Flange Pneumatic Side
13 HWP-X35/65CHQ-A 1.096 250N.M ML642A Spline Pneumatic Side
14 HWP-X35/65TQ-A 1.096 250N.M ML642A Flange Pneumatic Side
15

HWP-I35/74CHQ

1.8

250N.M

MSB-5M

Spline

Pneumatic

Side

1.536 LC5T28
1.82 LC5T88
16

HWP-I35/74TQ

1.8

250N.M

MSB-5M

Flange

Pneumatic

Side

1.536 LC5T88
1.82 LC5T28
17

HWP-I35/74CHS

1.8

250N.M

MSB-5M

Spline

Manual

Side

1.536 LC5T28
1.82 LC5T88
18

HWP-I35/74TS

1.8   MSB-5M

Flange

Manual

Side

1.536 LC5T28
1.82 LC5T88
Note

The above listed are the models and special specifications of common power take-off assemblies, or if you need to customize, please call for details.

 

Certifications

Packaging & Shipping

FAQ

1.Are you trading company or manufacturer ? 

We are Group Corporation manufacturer ,have Group Factories Contractor.

2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.

3. What’s the delivery time and can you lower the price? 
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
 

4.Can you supply some quick-wear parts? 

Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
 

6.Do you have any used products for sale? 

We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need. 

7.What’s the payment terms?

TT 30% as deposit, balance before shipment by TT or at sight.

8. How to guarantee customers get the goods smoothly after they payment? 
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you. 

9.How can you ensure the quality of the products? 

Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.

 

Application: Motor, Machinery, Agricultural Machinery, Car, Aerial Platform Crane Truck, Tanker Trucks Pto, ..
Function: Distribution Power
Hardness: Hardened Tooth Surface
Jmc Series Power Take off: Sdq-Gt32/65 (Sdq- 51/65) Sdq-Gt51/67 Sdq-Gt32/65-a
Jmc Transmissions: 6mt1420/DN3-70030-E0/Kn3 Jc5t28/5t26.5/Mti280jd
Zftransmissions: Zf6s500/Zf6s600/Zf6s558 Zf6s508/Zf6s458 Zf5s400 Zf
Samples:
US$ 380/Piece
1 Piece(Min.Order)

|
Request Sample

Power take off
Customization:
Available

|

Customized Request

agriculturalparts

Choosing the Right Agricultural Gearbox

There are a number of different types of agricultural gearboxes available. Some are Bevel, while others are Shaft-mounted, bearing-mounted, or CZPT gearboxes. To learn more about these different types, read on. We’ll explain how each works and what to look for in an agricultural gearbox. Alternatively, you can search for information on each type on the web. Agricultural gearboxes can be a great option for your next project.

Bevel gearboxes

Bevel gearboxes are a type of mechanical transmission system that uses enclosed spiral and straight bevel-gears to transmit rotational power. They are typically mounted on a right-angle shaft and have a wide range of horsepower and ratios. Some bevel gearboxes are designed to be installed at varying angles. For example, CZPT Gearbox provides bevel gear drives for portable grain augers, elevators, and carts.
Bevel gearboxes are the most common type of gearbox. They have a single-stage design and the beveled edges of two gears interlock to transfer torque and rotation. Bevel gearboxes have multiple advantages over other types of gearboxes. They are also more cost-effective, run quietly, and produce less transmittable torque. They are designed to be used in low-torque applications.
A right-angle gearbox is used for a variety of agricultural applications. It is well-suited for use with offset rotary fillers and hollow output shafts. It has a reduction ratio of 2.44:1. The gearbox is built with a cast-iron case and can produce power rates up to 49kW. These bevel gearboxes are used in small agricultural work, including crop treatment, soil preparation, and cement mixers.
Spiral and straight bevel gears have two major benefits. The first is more durable, while the latter is quieter. Both types have their advantages and disadvantages. Bevel gears can be noisy, so they may not be the best choice for your equipment. But the latter has many benefits. The Spiral bevel gear has a high degree of total coverage, but it costs more to produce.

Shaft-mounted

Shaft-mounted agricultural gearboxes are designed for conveyer systems. These devices have interchangeable mounting dimensions with CZPT and CZPT gearboxes. Agricultural gearboxes are critical to the entire food chain. Worn gears can cause significant loss to farmers. As a result, it is essential to purchase high-quality gearboxes for your farm equipment. The following are some tips to choose the right gearbox for your needs.
Agricultural tractors include an internal combustion engine 10 and a speed change gearbox. The engine’s cylinder block is mounted on the gearbox casing. The gearbox casing extends under the driver’s position and has an elongated shape in the longitudinal direction. The gearbox casing is connected to the rear axle casing 15 by a connecting shaft. The shafts are designed to engage and disengage in opposite directions.
The mounting position of the gearbox is an important consideration. Some applications require no foundation for the gear drive. Generally, a shaft-mounted agricultural gearbox can be attached to the drive equipment via a low-speed shaft. In addition, the shaft is secured around a solid shaft. Rigid flange couplings may be used to connect the gear drive and driven equipment. This type of mounting is preferred for applications where there is no foundation.
Shaft-mounted agricultural gearboxes are designed to optimize machine performance. CZPT Gearbox Company is an innovative company that manufactures top-quality gear drives for a variety of agricultural machinery. They can reverse engineer existing designs or create custom gearboxes for your farm machinery. These agricultural gearboxes are designed to help farmers optimize their machines for maximum efficiency. They transmit power from the input shaft to the output shafts and facilitate change of speed, direction, and rotation.
agriculturalparts

Shaft-mounted with bearings

If you are looking to buy an agricultural gearbox, it will be beneficial to look at the different types of shaft-mounted gearboxes available. Shaft-mounted gearboxes are often made of steel, and are commonly constructed with AGMA class 12 gearing. They typically utilize tapered roller bearings on all shafts, and have a patented triple seal system that prevents dirt and moisture from getting inside. Additionally, they are easy to install and remove, as they don’t require any tools. Finally, they are built to last with minimal maintenance, and will provide maximum uptime.
Shaft-mounted agricultural gearboxes are generally made of steel, and are available in both cylindrical and square shapes. Some types of shafts are able to rotate axially within the bearing while maintaining radial load carrying capabilities. Despite the differences in the shapes of these shafts, they offer high levels of efficiency and performance. For example, the Float-A-Shaft(r) 3 to 2 right-angle gearbox can accommodate both round and square-base mounting, and is capable of generating up to 1100 in-lbs of torque.
Shaft-mounted agricultural gearboxes are constructed from two types of roller bearings: cylindrical roller bearings and tapered roller bearings. A cylindrical roller bearing has one row of balls that are enclosed within a cage, and it has a single axis. The other two rows of bearings have a single or double-row arrangement. Both of them have high axial rigidity and can handle high axial loads.

CZPT gearboxes

The demand for food has skyrocketed since the turn of the century, and the World Bank estimates that the number of people on the planet will grow by 80 million annually by 2025. As the demand for food grows, agricultural machinery manufacturers are coming up with innovative ways to make the most of their land. This results in shorter cropping cycles and greater wear and tear on farm equipment, including CZPT agricultural gearboxes.
Bevel gearboxes are enclosed straight or spiral gears that transmit rotational power to various parts of agricultural machinery. They are available in a variety of right-angle and spiral configurations. The CZPT Gearbox, for example, features a 68-degree bevel gear drive for augers and grain carts. The company also offers a 50-degree bevel gear drive. These gearboxes are made with the latest technology and incorporate horizontally split housing designs.
Agricultural gearboxes from CZPT are available in a variety of designs, including reversing gears. Reversing gears feature ball bearings that reduce friction and increase efficiency. This gearbox can be purchased in a wide range of power ratings and blade counts, allowing the farmer to choose the one that works best for their needs. This will ensure long-term functionality and effectiveness. So whether you’re a farmer or a manufacturer of agricultural equipment, a CZPT agricultural gearbox will work for you.

Bevel gearboxes with bearings

The bevel gearing is a popular choice for agricultural gearboxes due to its high load capacity. The bevel gearing is widely used in mechanical transmission systems, including agricultural tractors. For modern harvesters, high-performance gearboxes are necessary for smooth operation. Leading agricultural equipment manufacturers rely on CZPT Gearbox Company to provide these high-quality and durable drive systems. This is why we supply bevel gearboxes for agricultural machinery.
A bevel gearbox can be either straight or helical. The latter option is the simplest type and tends to be cheaper to produce. However, it is difficult to realize small profile coverage with straight gearwheels. Furthermore, it is less efficient in transmitting torque. The bevel gearbox can be used for both clockwise and counterclockwise rotation. It is available with a standard mount and aluminum casing.
Depending on the type of agriculture machinery, bevel gearboxes with bearings are suitable for many tasks. Their versatility allows them to be used in a variety of mechanical applications. The double gear allows the upper bevel gear angular gear 2 to pivot relative to the lower bevel gear angular gear 3.
Besides bearings, other factors influence the performance of agricultural gearboxes. Insufficient data may make it difficult to obtain the exact gear. For this reason, a broken gear requires a detailed manufacturing drawing. This drawing requires expertise in technical gear, as well as specialized engineering manpower. It also increases the cost of production. The gears are subjected to heat treatment before being shipped to the customer.
agriculturalparts

Bevel gearboxes with CZPT gearboxes

The demand for agricultural products has increased dramatically since 2010. The world population is increasing at a rapid pace (80 million people per year until 2025), but land is not. Farmers are looking for ways to maximize their land’s potential to grow more food. This increased demand for agricultural machinery is driving the need for highly efficient gearboxes. With replacement parts easily available, manufacturers can meet the growing demand for agricultural equipment.
China Professional Gearbox Power Take off Spline Type for Crane Special Vehicle China Truck Shaft Pto Assembly   with Best Sales China Professional Gearbox Power Take off Spline Type for Crane Special Vehicle China Truck Shaft Pto Assembly   with Best Sales
editor by CX 2023-10-18