The EP Greenhouse gear reducer is a compact and lightweight reduction reducer with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear driver is used in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear driver is usually rainproof and windproof. The gear motor includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is definitely locked when the reduction gearbox is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep the gear essential oil at a low pressure under all conditions, even at high temperatures. Thanks to the use of an expansion chamber, the gear driver could be installed in any placement. There are no restrictions, since there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the apparatus oil of the gearbox in optimal condition for its entire operating life time. The gear driver is suitable for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an included chamber and is certainly enclosed by an impact-resistant plastic cover. The limit change system is accessible and simple to adjust. The limit change system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).