Pool Chair Lifts
Exam Room Tables
Laser Cutting Machines
Industrial Textile Machinery
Test & Measurement Equipment
Automated Guided Vehicles (AGV)
If you need a smaller sized design for an application requiring lower load capability, we also manufacture value-added Spur Gear Motors. Learn more about the different features and benefits in our Planetary Gear Motor versus. Spur Gear Motor style note.
Built to your unique requirements
Most of our DC Motors could be complimented with among our Planetary Gearheads. Ever-Power will work with you to design and manufacture a Planetary Gear Electric motor that may optimize the functionality of your application.
Engine Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
Ever-Power is a DC planetary gear motor manufacturer providing custom-designed solutions for all applications. Demand a quote for planetary gear motors or contact us for assistance with your design.
These tiny brushed DC gearmotors have got a diameter of just 6 mm and weigh simply over a gram, making them great actuators for miniature robots and very small mechanisms. They contain a coreless engine fastened to a planetary gearbox by a small clip. The gears are produced from liquid crystal polymers (LCPs), and gearbox’s nylon output shaft is compatible with this 14 mm tires. Three gear ratios are available:
26:1, that includes a free run speed of 2500 RPM and stall torque of 1 1.5 oz-in (110 g-cm) at 6 V
136:1, which has a free run speed of 500 RPM and stall torque of 8 oz-in (550 g-cm) at 6 V
700:1, which has a free run velocity of 90 RPM and stall torque of 12 oz-in (900 g-cm) in 6 V
Note: Stalling or overloading gearmotors may greatly decrease their lifetimes and actually result in immediate harm. For these gearboxes, the suggested upper limit for instantaneous torque can be 3.5 oz-in (250 g-cm); we strongly advise keeping used loads well under this limit. Stalls can also lead to rapid (possibly on the purchase of seconds) thermal damage to the engine windings and brushes; an over-all recommendation for brushed DC electric motor procedure is 25% or less of the stall current.
The intended nominal operating voltage for these motors is 3 V to 6 V, though in general, these kinds of motors can be used at voltages outside this range (rotation typically starts among 0.2 V and 0.3 V). Lower voltages might not be practical, and higher voltages could begin negatively affecting the life of the motor. When operating at 3 V, the free-run rate, stall torque, and stall current will all become approximately half of what they are in 6 V as these specifications scale roughly linearly with voltage.
Because the gearmotor’s output shaft is nylon, there may be small variances in the diameter from unit to unit. These variations might cause press-fit attachments like our 14 mm wheel to match loosely in some instances. If you experience a loose fitting, you could attempt swapping wheels or using a small dab of glue to greatly help contain the wheel on.
The following diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox includes a D-shaped plastic result shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” part of the shaft is definitely 2.5 mm long. The electric motor measures 6 mm in diameter and 9.3 mm long, and the gearbox length, labeled “L” in the diagram below, depends on the gear ratio.
26 RPM Planetary Gear Motor with encoder: compatibility
This small 12V motor includes a magnetic encoder mounted before the gearbox for a much better resolution. Its 4 mm output shaft makes it compatible with plenty of ep mounts and component, which includes clamping hubs, Planetary electric motor mounts, and also 4 mm toothed tires and pinion gears.
Specialized specifications of the Superior Planetary Gear Electric motor with Encoder
Nominal voltage: 12V
Voltage range (recommended): 3-12V
No-load speed: 26 rpm
No-load current: 0.21A
Stall current: 4.9A
Stall torque: 42 kgf.cm
Gear ratio: 455,185:1
Metal planetary gear
Output shaft diameter: 4 mm
Output shaft style: D-shaft
Output shaft support: dual ball bearings
Electrical connection: 2.54 mm 6-pin female header
Operating temperature: approx. -10 to +60 °C
Compatible installation screws: M2 x 0.4 mm
Weight: 117.6 g
Cycles per revolution (electric motor shaft): 3
Cycles per revolution (result shaft): 1,365.555
Countable events per revolution (motor shaft): 12
Countable events per revolution (output shaft): 5,462.22
Relative quadrature encoder with magnetic Hall effect sensor
Encoder sensor insight voltage range: 2.4 to 26V
Encoder sensor result pulse amplitude: equivalent to encoder sensor input voltage
Resources for the 26 rpm planetary gear motor
DE3 magnetic encoder use parameters
Motor spec sheet
Spur Equipment vs. Planetary Gear
The two the majority of common setup of DC engine gearbox are spur and planetary. Spur type gearbox are simpler, less expensive, and work best for low torque applications. Torque capability of spur type gearbox is limited because each gear in the teach bears different load. Planetary gearboxes, on the other hand, share the same load over multiple gears, making them more durable for high torque program.
Using Range Voltage: – 12-24V
Nominal Voltage: 24V
No Load Speed: 90 r/min
No Load Current: 500 mA
Max. Efficiency Speed: 90 r/min
Max. Efficiency Current: 3.5A
Max. ETorque: kg. cm-27 Power: W- 35
Stall Torque: 135 kg. cm
Stall Current: 20A
Reduction Ratio: 1:00 – 91