Equiped using a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves and a tank, this power unit can drive a double acting cylinder to extend and retract with no directional solenoid valve. It is normally used in recre-ational motor vehicles, pleasure boats and portable phases, and so forth.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities. N46 hydraulic oil is advisable.
4. The energy unit proven is created to be mounted horizontally.
five. Oil changing is required right after the preliminary one hundred operation hours, afterwards once each and every 3000 hrs.
6. Check the oil level from the tank just after the first running from the power unit.