Hanging Pulleys pertaining to Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal, nylon, and light weight aluminum are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Designs C, D, and J possess a bracket on underneath for tying off a single end of a rope.
Style K decrease the force needed to keep your load in place. Unlike regular pulleys, these possess a V-groove for more hold on your rope, and they ratchet when under load therefore they won’t slip in the additional direction. Pulley for3/8″ dia. rope could be set to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Light weight aluminum and nylon are lightweight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized metal is definitely more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless is usually more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Stainless steel is certainly more corrosion resistant than steel.
Hanging Pulleys pertaining to Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load. They possess a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum can be corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang in your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never make use of to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as for example block and deal with systems.They are able to reduce the force needed to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
Hanging Pulleys meant for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about half the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Style E pulleys have bracket on the bottom that lets you tie off 1 end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the pressure of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Design C to keep rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys designed for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off 1 end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never use to lift people or items over people.