We Our solution selection also handles loc ept assemblies (clamping aspects/loc ept gadget), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, common joint, rod ends and yokes. – EPG Team the largest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
2 Layers 3 Layers High Pace PPR PE Pipe Co-Extrusion Line Production Equipment
HDPE Pipe Software:
Agricultural Irrigation water provide&Sweage drainage pipe&Discharge method&Gas supplly program&Architectural h2o provide.
Production Flow of Pipe Production Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Features of Pipe Machiner:
one- 30m/min of maximum lineal extrusion pace, massive capacity and lower electricity consumption, and accomplished multi- layers co extrusion with 1-5 levels.
two- The copper bush is more dress in-resisting and stop content leakage which can promise a secure managing of extruder.
3- Materials feed via spiral groove, successful transmission and can successfully decrease back again-pressure on extruder.
4- Exclusive layout (barrier, shearing and mixing zone) assures a uniformed plasticizing influence, and can decrease the pressure on the screw which guarantees a high pace and steady output capability.
5- Substantial torque equipment box has a smart figuration, compact building, minimal sounds, large carrying capacity, higher transmission efficiency can assure long-time difficulty-free of charge procedure
6- PCA(pipe air cooling system) of die head largely enhance the extrusion speed and reduce the cooling length of extrusion line, and improve good quality of interior pipe floor
seven- Intelligent PLC controlling program with human-welcoming interface make the operation simply and conveniently
8- Chip-free cutter ensuing flat and easy cutting surface of pipe.
Main Technical Parameter:
| Machine model | Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
| Vacuum pump | Water pump | Size(mm) | H2o pump | Duration(mm) | caterpillar Quantity | Motor | Cutting type | ||
| HDPE63 | φ16mm-φ63mm | 3kw*two | 3kw*two | 6000mm | 3kw*1 | 6000mm | two | one.5kw*2 | No dust cutter |
| HDPE-one hundred ten | Φ40mm-φ110mm | 4kw*two | 3kw*2 | 6000mm | 3kw*1 | 6000mm | 2 | 3kw | No dust cutter |
| HDPE-one hundred sixty | Φ50mm-φ110mm | 4kw*2 | 4kw*two | 6000mm | 4kw*one | 6000mm | three | 1.1*3 | Planetary cutter |
| HDPE-250 | Φ75mm-φ250mm | five.5kw*2 | 5.5kw*two | 6000mm | 4kw*one | 6000mm | three | 1.1kw*3 | Planetary cutter |
| HDPE-315 | Φ110mm-φ315mm | five.5kw*2 | five.5kw*two | 6000mm | 5.5kw*1 | 6000mm | 4 | 1.1kw*4 | Planetary cutter |
| HDPE-630 | Φ315mm-φ630mm | seven.5kw*2 | 7.5kw*2 | 6000mm | seven.5kw*one | 6000mm | 6 | 1.1kw*six | Planetary cutter |
| HDPE-800 | Φ400mm-φ800mm | five.5kw*2(2m) | 5.5kw*2(2m) | 6000mm | 5.5kw*two | 6000mm | 8 | 1.1kw*8 | Planetary cutter |
| seven.5kw*2(10m) | 7.5kw*2(10m) | ||||||||
| HDPE-1200 | Φ630mm-φ1200mm | five.5kw*two | 7.5kw*two | 6000mm | 7.5kw*two | 6000mm | 10 | one.1kw*10 | Planetary cutter |
Machine image:
Extrusion machine
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Car-Cutter
Plastic Pipe Stacker
If you have any queries, make sure you make contact with us:
Mob/Watsap/Wchat:+86 18915692496
The use of original gear manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our organization and the listed replacement components contained herein are not sponsored, accepted, or produced by the OEM.
